 momu314
Junior Member
Messages : 10
Inscrit(e) le: 07/12/2018
|
 Posté le 07/12/2018 08:01 |  | | pet preform bottle machine line factory |
PP preform bottle injection molding machine
This injection molding machine can produce hot filling bottle preforms. It is easy to operate and energy-saving. This machine not only won't produce waste runner, and the mold of the cooling water and hydraulic oil are recycled, thus greatly reduces the system cost.
Features:
Proportional pressure and flow control with the advantage of fine adjustment and high precision
Low noise hydraulic system
Nitrided screw and barrel with long service life
saving electricity, water, raw materials and labor
Mechanical and electrical dual safety interlock
Technical Parameter
ITEM UNIT SZ-3800A
INJECTION UNIT
SCREW DIAMETER mm 65 70 75
SCREW L/D RATIO L/D 22.6 21 19.6
THEORETICAL SHOT VOLUME cm3 1061 1231 1413
SHOT WEIGHT(PS) g 966 1120 1286
INJECTION PRESSURE Mpa 203 175 152
THEORETICAL INJECTION RATE (PS) g/s 308 357 410
PLASTICISING CAPACITY g/s 50.6 60.5 71.5
SCREW TORQUE N.m 2860
MAX.SCREW ROTATE SPEED r/min 150
INJECTION STROKE mm 320
CLAMPING UNIT
MAX.CLAMPING FORCE KN 3800
MAX.OPENING STROKE mm 680
SPACE BETWEEN TIE BARS mm 680ⅹ680
MOULD HEIGHT mm 250-710
MAX.DAYLIGHT mm 1390
EJECTOR FORCE KN 90.7
EJECTOR STROKE mm 170
EJECTOR QUANTITY
13
OTHER
PUMP MOTOR POWER KW 37
PUMP PRESSURE Mpa 16
HEATING POWER KW 25
HEATING ZONE
5
SIZE m 6.8ⅹ2.0ⅹ2.3
NET WEIGHT t 15
OIL TANK CAPACITY L/D 820
INTERNATIONAL DESIGNATION
3800-2150
PLATEN DIMENSION
NOZZLE POSITIONpet preform bottle machine line factory
website:http://www.shenzhoumachines.com/injection-molding-machine/pet-preform-injection-molding-machine/
|
|
